How to Effectively Place Motion Sensors in Your Home

Video: Where Should You Install Motion Sensors?

 
 

How Motion Sensors Work

The most common type of motion sensor used in home security is a passive infrared sensor, otherwise known as a PIR sensor. PIR sensors send out rays designed to detect heat. The sensor’s rays fan out, so they’re most concentrated right next to the sensor, and become less sensitive farther away from the sensor. The rays can’t detect heat through walls or furniture, so it’s important to place these sensors where the rays are clear of obstacles.

Less common are microwave sensors, ultrasonic sensors, vibration sensors, and area reflective type sensors. Dual technology sensors combine PIR technology and microwave technology for fewer false alarms. To learn more about how motion sensors work and the role they play in a home security system, read our Beginner’s Guide to Motion Sensors.

Good Placement Options

Selecting the best place to install motion sensors will allow you to cover a larger area with fewer sensors, saving you time and money.

 

High Traffic Areas

You know those areas of your home where the flooring gets worn down the most because everyone walks through them? Those are great locations for motion sensors because an intruder will have to walk through those spots as well. 

Corners

Imagine you’re trying to get a good photograph of a large room. Where would you stand to take it? Yup, a corner. The same location that gives you the widest view of a room will give your sensor a good view of the room as well.

Six to Eight Feet Up

You want your motion detector to get a birds-eye view of the space, but placing it too high can lead to blind spots down low. Six to eight feet up on the wall is the sweet spot for most motion sensors. You can put a motion sensor on the ceiling, but first make sure it has a full 360-degree viewing angle. 

Over a Doorway

You know how pranksters like to position buckets of water over doorways to drop on unsuspecting victims? You can use that same technique to keep your motion sensors out of intruders’ sight by placing them just over an exterior door inside your home. They won’t know it’s there until it’s already sounded an alarm. 

Basements

Basement windows and doors are prime entry points for intruders who want to stay off your radar. Motion sensors work great in basements because most basements have wide spaces with few barriers and they don’t heat up like garages do.

Light Bulb
Pro Tip

Basements are also a good spot for flood sensors. A flood sensor can detect moisture on the floor and sound an alarm to alert you to flooding before too much damage happens.

Behind Your Valuables

Catch thieves red-handed by placing motion sensors behind valuables. This makes the sensor blind to movement unless the crook moves the object and reveals themselves to the motion sensor, triggering an alarm.

Poor Placement Options

Putting your active sensors in the wrong location can lead to blind spots and false alarms. Here are a few sensor locations to avoid.

Behind Large Furniture

Think of your infrared motion detection beam like a flashlight beam. If you place it above a piece of tall furniture that sticks out far from the wall, the furniture could create a “shadow” or a blind spot. Avoid putting motion sensors on a wall near the top of a bulky entertainment center, wardrobe, or other large piece of furniture.

Near a Heat Source

Motion sensor infrared works by detecting sudden changes in temperature. Putting a motion sensor near a heating vent, radiator, oven, light fixture, or anywhere else likely to have a sudden increase in temperature is a recipe for false alarms.

Most modern windows are insulated enough to block sudden temperature changes from direct sunlight, but if you have older windows, you should avoid placing sensors where they could heat up from the sun.

Garages, Attics, Patios, and Sunrooms

Again, motion sensors use their infrared beams for high temperature detection, so it’s a good idea to avoid putting them in non-climate-controlled spaces that might heat up, like garages, attics, patios, and sunrooms. Consider alternative security solutions for these spaces, like door and window sensors, glass break sensors, or a security camera.

Stairs

If you have pets and you don’t want your motion sensors to get triggered by your dog or cat, avoid putting sensors at the top of stairs. As your pet climbs the stairs, it will look bigger to the motion detector and it could set off an alarm.

Across from Doors

While it’s a good rule of thumb to avoid putting motion sensors across from doors, it’s really dependent on your home’s layout. Remember that PIR sensors can’t see through walls, so you may be limiting a sensor’s detection scope if you put it directly across from a doorway in a confined area.

Smart Motion Sensors

Some standalone motion detectors, like the Samsung Smartthings Motion Sensor, can be used for a variety of purposes when connected to a hub like the SmartThings Hub. You can create scenes with specific conditions, like, “When motion is detected in the upstairs hallway between 6 a.m. and 6:30 a.m., start the coffee pot.” You can also link motion sensors with smart plugs to control lighting or connect them to your security system.

Shopping Cart